Start-Up; Switching On; Activation - TEXA KONFORT 744 Technical Manual

9 START-UP

This chapter describes the operations required in order to start up the device.

9.1 Switching on

To start up the device, set the main switch in the I (ON) position.

9.2 Activation

The device includes a demo mode (Demo).
The device can be used in Demo mode for a maximum cycle of 15 power on-
power offs.
The equipment locks automatically at the end of the cycle and can
no longer be used.
In order to unlock the equipment you must enter a specific
countercode.
Proceed as follows:
1. Contact your dealer.
2. Give the retailer the code.
3. Enter the counter-code into the software.
en
37