11 STOP
This chapter describes the operations required in order to stop the equipment.
Do not switch off the equipment by disconnecting the power cable
from the socket.
Before switching off the equipment, using the specific pressure
gauges, make sure the service pipes are not under pressure and
eventually depressurise them through the specific software
function.
11.1 Normal Stop
To stop the equipment, set the main switch to the O (OFF) position.
11.2 Emergency Stop
To switch off the charging station immediately in case of emergency, press the
emergency button located on the equipment's control panel.
Unlock the button by turning it slightly clockwise to remove the emergency lock
once the conditions for operating in safety are restored.
11.3 Stopping the Equipment for Long Periods
Should you intend to stop the equipment for a long period of time, follow the
instructions below.
Proceed as follows:
1. Close the external tank's valve.
2. Depressurise the pipes through the specific software function.
3. Disconnect the equipment from the power mains.
4. Disconnect and store the external tank as indicated in the specific safety sheet.
5. Place the cover provided over the device.
6. Put the device in a safe place, not exposed to outside weather conditions.
42