Table of Contents
Advertisement
Press
.
8.3 Moving the Device
The device has been specifically researched and designed to lower the centre
of mass; to do so the heavier components have been placed on the bottom,
nonetheless it wasn't possible to completely eliminate the risk of overturning.
The equipment must be moved on its own wheels.
The anti-shift locks must be used each time the equipment is
moved within the workspace with the refrigerant tank installed.
Proceed as follows:
1. Lock the refrigerant scale.
2. Unlock the wheels (if necessary) and push the equipment using the specific
handles located on the back of it.
The equipment must never be transported with the refrigerant tank
still installed.
Remove the refrigerant tank even for short transportation and use
the original packaging.
8.4 Positioning
The device must be placed near the A/C system that must be checked; make
sure it is on a flat surface and in an appropriate environment, as specified in the
safety regulations within this manual.
Once the device has been positioned, we suggest locking the wheels with the
specific mechanical brakes the wheels are equipped with.
Position the equipment so that the main switch can be always
reached easily.
32
Hide quick links:
Advertisement
Table of Contents
