Table of Contents
Advertisement
8.5 Connection to the Power Mains
The device must be connected to the mains via the specific supply cable;
respect the applicable voltage, frequency and power values.
The voltage, frequency, and power values that can be applied can be found on
the tag located near the main switch.
Proceed as follows:
1. Go to the left hand side of the device.
2. Connect the supply cable to the power mains via a socket connected to ground.
8.6 Entering the SD CARD
The SD CARD contains the software thanks to which the equipment can be
started and carry out all the A/C system charging operations.
The software allows you to automatically store each charging service carried
out.
The SD CARD must be inserted into the specific slot before use,
Proceed as follows:
1. Locate the SD CARD slot.
2. Enter the SD CARD in the slot with
the label facing upwards until you
hear a soft click.
8.7 How to Load the Paper into the Printer
The equipment is provided with a thermal printer.
You must fill the printer with paper before use.
Proceed as follows:
1. Lift the paper compartment opening lever lightly until the corresponding cover
locks.
en
33
Hide quick links:
Advertisement
Table of Contents
