How To Use The Software - TEXA KONFORT 744 Technical Manual

Level of concentration of carbon
dioxide (CO2)
Standard
Close to allowed limit (in the workspace). Display message
Above the allowed limit (in the workspace).
If the level of concentration exceeds the allowed limit, the discharge phase is
automatically interrupted.
Proceed as follows:
1. Move away from the equipment.
2. Aerate the workspace for the time needed in order to bring the level of
concentration of carbon dioxide (CO2) back within the safety level.
The discharge of the refrigerant resumes normally once the alarm has ceased,
when the level of carbon dioxide (CO2) has returned to normal.

10.5 How to Use the Software

The software installed in the KONFORT 744 charging stations allows you to
launch all the functions needed for recharging and checking the vehicle's A/C
system.
The keypad on the top panel of the device acts as an operator-machine interface
and allows you to select and launch the functions available, enter specific data
for the operation that needs to be carried out and, in general, allows you to
complete all the operations the software permits.
Key Name
ENTER
DELETE
STOP/BACK/CANCEL
INFO
UP/DOWN ARROW
Warning by the equipment
No warning
Display message.
Audible warning through a buzzer.
Function
Allows you to confirm the selection made.
Allows you to delete data that has been
entered.
Allows you to instantly stop the phase in
progress or go back to the previous
menu.
Allows you to view specific additional
information regarding the menu selected.
Allows you to scroll the options within a
menu.
en
39