Blood Glucose Testing - Abbott FreeStyle Libre User Manual

Blood Glucose Testing

You can use the built-in meter to check your blood glucose, whether you
are wearing a Sensor or not . You can perform a blood glucose test on
your fingertip or approved alternate site . Be sure to read the test strip
instructions for use prior to using the built-in meter .
Step
1
CAUTION: If you think you have low
glucose (hypoglycaemia) or you suffer from
hypoglycaemia unawareness, test on your
fingers .
Wash your hands and the test site with warm,
soapy water for accurate results . Thoroughly dry
your hands and the test site . To warm the site,
apply a warm, dry pad or rub vigorously for a few
seconds .
Note: Avoid areas near bones and areas with
lots of hair . If a bruise forms, consider selecting
another site .
43
ART34745-008_rev-A_manual.indd 43-44
Action
Step Action
2 Check the test strip expiry date .
D5
13758
2016/ 03
E .g . Expiry date:
2016 March 31
3
Open the foil test strip packet at the notch and
tear down to remove the test strip . Use the test
strip immediately after removing from the foil
packet .
4
Insert the test strip with the three black lines at
the end facing up . Push the strip in until it stops .
5
Use your lancing device to obtain a blood drop
Apply Blood
and apply blood to the white area at the end of
the test strip .
If sounds are turned on, the Reader beeps once
to let you know you have applied enough blood .
Note: See test strip instructions for use for
re-application instructions .
44
3/28/17 1:37 PM