Blood Glucose Testing - Abbott FreeStyle Libre 2 User Manual

Blood Glucose Testing

You can use the built-in meter to check your blood glucose, whether you
are wearing a Sensor or not. Be sure to read the test strip instructions for
use prior to using the built-in meter.
Step
1
CAUTION: Test on your fingers in accordance
with the Intended Use in this section.
Wash your hands with warm soapy water for
accurate results. Thoroughly dry your hands.
To warm the site, apply a warm dry pad or rub
vigorously for a few seconds.
Note: Do not use lotion or cream on the test
site. Avoid moles, veins, bones, and tendons.
Bruising may occur at the test site. If you get a
bruise, consider selecting another site.
83
DOC40703_rev-K_manual.indd 83-84 DOC40703_rev-K_manual.indd 83-84
Action
Step Action
2
Check the test strip expiration date. Do not use expired test
strips as they may give inaccurate results.
3
Open the foil test strip packet at the notch and
tear down to remove the test strip. Use the test
strip immediately after removing from the foil
packet.
4
Insert the test strip with the three black lines at
the end facing up. Push the strip in until it stops.
Note: The Reader's built-in meter turns off after 2
minutes of inactivity.
84
3/19/21 9:13 AM 3/19/21 9:13 AM