Using The Built-In Meter - Abbott FreeStyle Libre User Manual

Using the Built-in Meter

The Reader has a built-in meter that can be used to test your blood
glucose and blood ketone, or to test the meter and strips with control
solution .
WARNING: Do NOT use the built-in meter while the Reader is
connected to an electrical outlet or a computer .
41
ART34745-008_rev-A_manual.indd 41-42
IMPORTANT:
•
Use the Reader within the test strip operating temperature
range as blood glucose and ketone results obtained outside
the range may be less accurate .
•
Use only FreeStyle Optium test strips .
•
Use a test strip immediately after removing from its foil
packet .
•
Only use a test strip once .
•
Do not use expired test strips as they may cause inaccurate
results .
•
Do not use a wet, bent, scratched or damaged test strip .
•
Do not use the test strip if the foil packet has a hole or is torn .
•
Results from the built-in meter are shown only in your
Logbook and not in other history options .
•
Refer to your lancing device instructions for use for how to
use your lancing device .
42
3/28/17 1:37 PM