GENERAL OUTLINE Electromechanical operator designed to automate residential-type gates. The operator keeps the gate blocked on closing and on opening, without needing an electric lock. The operator has no mechanical clutch. It must be controlled by an electronic control panel provided with torque setting. The end-of-stroke operation is managed by the control panel.
Page 3
External measures Fig. 1 POSITIONING FOR BASE PLATE Prepare the sub structure in order to fix base plate, respecting approximately measures like Fig. 1 Fig. 2 www.quikoitaly.com...
Page 4
POSITIONING OF GEAR MOTOR Position the gear motors (Fig. 3) on the great plate, using the appropriate screws supplied. The right coupling between rack and pinion may be carried out by fixing the small plates to the great plate, through the eyelets associated. Unlock the gear motors, through appropriate release lever (Fig.
Page 5
FIXING RACK AND END-RUN DEVICE Position the first element of rack on the cogwheel, previously unlocked, as in Fig. 5. Fix the element to the gate, in the way you wish, by applying to it the other elements of rack necessary, ensure that all be united and aligned.
MAINTENANCE When carrying out maintenance operation on the controller, disconnect it from the mains power supply. The actuator does not require periodical maintenance operations. • Check the safety devices of the gate and automation. • Periodically check the pushing force and correct the value of the electric torque in the control board if necessary.
DECLARATION OF CONFORMITY (OF THE MANUFACTURER) Manufacturer: Quiko Italy Sas Via Seccalegno, 19 36040 Sossano (VI) Italy hereby declares, under his liability, that the products: Sliding gate operators of the ZEBRA serie are in compliance with the essential safety requirements of the regulations: - Electromagnetic Compatibility Directive ......2004/108/EC...