Advertisement
6.
FIXING RACK AND END-RUN DEVICE
7.
CHECKING THE AUTOMATION
Before considering the automation completely operational, the following
checks must be made with great care:
• Check that all the components are firmly anchored.
• Control all the safeties work properly (i.e. photocells, pneumatic skirt,
etc.).
• Check the emergency maneuvers control.
• Check the opening and closing maneuvers using the controls.
• Check the control unit electronic logic in normal (or customized)
operation.
8.
THE CONTROLS
Any malfunction should be corrected immediately by a qualified specialist.
Keep children at a safe distance from the field of action of the automation.
With the automation the gate has a power driven opening and closing. The
controls can come in various forms (i.e. manual, remote controlled, limited
access by magnetic badge, etc.) depending on needs and installation
characteristics. For details on the various command systems, consult the
specific instruction booklets.
Position the first element of rack on
the cogwheel, previously unlocked,
as in Fig. 5. Fix the element to the
gate, in the way you wish, by
applying to it the other elements of
rack necessary, ensure that all be
united and aligned. Locate the
desired position and fix end-run
device (F) on rack as indicated in
the previous Fig. 2, those with
grains included. Close the release
lever and perform the necessary
electrical connections.
Fig. 5
www.quikoitaly.com
Advertisement
