Table of Contents
Advertisement
Chapter 1
Introduction
Flexibility
The device supports both IP convergence sublayer for wireless Internet service providers or Ethernet
Convergence Sublayer, ideal for mission critical private networks.
Radio and Modem Features
• Supported Frequency Bands: 5251, 5151, 7251
• Frequency: 1350 MHz to 1525 MHz
• Radio Access Method: IEEE802.16-2005 (16e OFDMA)
• Operation Mode: TDD
• Compatibility: Wave 2 Profile (MIMO)
• Channel Bandwidth: 5MHz, 7MHz, 10MHz
• Frequency Resolution: 0.25 MHz
• Antenna Support: Integrated Dual Slant Antenna
• Antenna Diversity Support: STC/MRC/MIMO
• Output Power (average): 24 dBm
• FFT/Modulation: 1024/512 FFT points; QPSK, 16 QAM, 64 QAM
• FEC: Convolutional Turbo Code
• Dynamic Range:
▪ RX: -100 dBm: -20 dBm
▪ TX: -30 dBm: +24 dBm
Section 1.2
Configuration Ports and Indicator LEDs
Connectors and LED indicators are found on the bottom of the device casing.
Figure 1: RUGGEDCOM WIN5214 Connectors
1. ETH/PWR
2. Ground
Name
ETH/PWR
Ground
2
1
Description
Data and power from PoE injector
Ground
RUGGEDCOM WIN5214
Installation Guide
2
Connector Type
RJ-45
Grounding screw
Configuration Ports and Indicator LEDs
Advertisement
Table of Contents
