Certification; Standards Compliance; Agency Approvals - Siemens RUGGEDCOM WIN5214 Installation Manual

Hide thumbs Also See for RUGGEDCOM WIN5214:
Table of Contents

Advertisement

RUGGEDCOM WIN5214
Installation Guide

Certification

The RUGGEDCOM WIN5214 ODU CPE has been thoroughly tested to guarantee its conformance with
recognized standards and has received approval from recognized regulatory agencies.
Section 5.1, "Standards Compliance"
Section 5.2, "Agency Approvals"
Section 5.3, "MIL-STD Ratings"
Section 5.4, "IEEE 802.16e Mobile WiMAX Compliance"
Section 5.5, "Environmental Type Tests"
Section 5.1

Standards Compliance

The RUGGEDCOM WIN5214 complies with the following standards:
• FCC Compliance
This equipment has been tested and found to comply with the limits for a Class A digital device pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications. Operation
of this equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference on his own expense.
• Industry Canada Compliance
CAN ICES-3 (A) / NMB-3 (A)
• Other
EN 50155 (Railway)
Section 5.2

Agency Approvals

The RUGGEDCOM WIN5214 has received approval from various agencies.
Agency
CSA
CE
TUV
CE
Standards Compliance
Standards
CSA C22
EN 60950-1
UL 60950-1
ETSI EN 301489-1/4,
ETSI EN 302 326-1/2/3
Chapter 5
Certification
Comments
Approved
Approved
Approved
Approved
31

Advertisement

Table of Contents
loading

Table of Contents