Operation
4.2.1.1
Change the language setting
4.2.1.2
Change the data output setting
4.2.2
First steps after installation
24
The instrument functions in the selected language until the option is changed.
1. Turn the instrument on.
2. Select
SYSTEM > LANGUAGE.
3. Select the required language.
4. Press
to confirm the selection.
OK
The instrument functions in the selected data output until the option is changed.
1. Turn the instrument on.
2. Select
SYSTEM > DATA OUTPUT
3. Select the required setting.
4. Press
to confirm the setting.
OK
Risk of injury to eyes, skin and respiratory
Make sure that the reagent tubes are in the correct position in the titration cell to avoid leaks and
the potential escape of reagents.
1. Prime the burette with titrant
2. Check the stirring speed
.
WA R N I N G
(4.8.1
Burette).
(4.8.2
Stirrer).