Wheels; Replacing Wheel Suspension - Invacare CometALPINE+ Service Manual

Invacare® Comet Series
When disassembling, note the position of small
parts such as screws and washers. Put small parts
down so that they can be reassembled in the right
sequence.
• Phillips screwdriver
1. Remove seat.
2. Remove shroud.
3.
Disconnect battery cable A.
4.
Remove bolts A on rear shroud.
5. Lift the rear shroud upwards.
6.
Remove screws (1) on rear light.
22
7. Remove rear light.
8.
Remove screws (1) on rear light glass.
9.
Remove rear light glass (1).
10. Replace lightbulbs (2).
11. Install parts in reverse order.
12. Test function.

5.8 Wheels

5.8.1 Replacing wheel suspension

CAUTION!
Risk of accident
Accidental rolling can lead to accidents.
– Secure scooter against rolling away.
When disassembling, note the position of small
parts such as screws and washers. Put small parts
down so that they can be reassembled in the right
sequence.
• 32 mm wrench
• Phillips screwdriver
• Supporting wooden block
1. Remove seat.
2. Remove shroud.
1603798-D