Removing The Carrycot From The Frame - EasyWalker QTRO Instruction Manual

The EasyWalker carrycot is simple to assemble. Before using for the first time, take the
carrycot out of the box, take the cover off the carrycot and remove the accessories, the
mattress and the inside covers (image 20). Pull the fastener on the bar (nearest to the
head-end) in the direction of the head-end until it clicks, left and right, into the metal
holder (image 19). Pull the fastener on the bar (nearest to the foot-end) in the direction
of the foot-end until it clicks, left and right, into the metal holder.
Attach the inside covers to the carrycot again with Velcro. Put the mattress back in the
carrycot. You can now choose whether you want the fleece or cotton side uppermost.
(image 20).
Turn the sun canopy upwards by pushing the black buttons on both sides of the sun
canopy and simultaneously turning the canopy upwards (image 21). Ensure that the
canopy cannot turn any further and release the buttons (image 22). Reattach the cover
over the carrycot.
Attaching carrycot to the frame
Engage the parking brake of the EasyWalker QTRO (image 24). Remove the seat, the
sun canopy and the bumper bar from the frame (see the previous pages). Place the
connection tube with open clips, on the inside against the frame (image 23). Position
between the two caps and shut the left and right clips until they click. Lift up the carrycot
using the grips in the sun canopy and under the foot-end. Slide the hooks (under head-
end) over the tube at the front of the frame above footplate. Now pull the hand grip
(under foot-end) backwards so that the clips open and, at the same time, push the clips
over the connection tube. Let go of the hand grip. The clips shut by themselves around
the connection tube (image 25).
!
WARNING: Check that the carrycot body or seat unit attachment devices are correctly
engaged before use.
IMPORTANT: A small child has very sensitive skin. Never leave your child in the
EasyWalker carrycot in the sun without the sun canopy on.

Removing the carrycot from the frame

Engage the parking brake of the EasyWalker QTRO. To remove the carrycot from the
frame, hold onto the carrycot by the hand grips in the sun canopy and under the foot-
end. Now pull the hand grip (under the foot-end) backwards so that the clips under the
foot-end open and, at the same time, lift the foot-end away from the connection tube.
Slide the carrycot towards the head-end, away from the tube at the front of the frame.
TIP: The carrycot has four black feet on the underside so that it can be used as a cot
without a supporting frame.
TIP: The hand grip in the sun canopy is suitable for lifting the carrycot if it has been lifted
up completely. In the bag, at the foot-end, there is an extra hand grip so that you can
carry the carrycot.
Using the EasyWalker QTRO
IMPORTANT: Avoid dangerous situations. Always use the wrist band attached to the push-
bar. Take your child out of the EasyWalker QTRO if you go up or down stairs, escalators
or steep hills.
IMPORTANT: Do not use the EasyWalker QTRO if any part is broken, torn, incomplete or
does not seem to be functioning correctly.
IMPORTANT: The EasyWalker QTRO is not designed for use when jogging or roller
EN-20