Summary of Contents for Johnson Controls YORK BCHO-74G
Page 1
Technical Information � � � � � � � � ��������������������� Johnson Controls Manufacturing España, S.L. is participating in the EUROVENT Certification Program. Products are as listed in the EUROVENT Directory of Certified Products, in the program AC1, AC2, AC3, LCP and FC.
Index Page Page General Information Accessories - General description - Standard accessories - Nomenclature Duct electric heaters for BLI-74 to 154 Technical Specifitations - Technical specifications - General dimensions - General characteristics - Mechanical specifications - Cooling interconnection - Dimensions with packing and weights - Installation - Control panel - Wiring diagrams...
General Information equipped with internal protection of the motor. Includes an electric heater for heating oil in the sump, which makes General description start-ups easier and avoids oil being removing from the The heat pump of the split system air-air type allows air compressor.
tactors, operating relay and transformer. Complies with the or in operation along with the compressor. Three speeds European standards in force. can be selected. The controls are beneath a cover. Thermostat The BCHO units include, as standard equipment, the elec- tronic DPC-1 thermostat.
Indoor units Model BLI-74 BLI-104 BLI-154 BCI-74 BCI-104 BCI-124 BCI-154 BVI-74 BVI-104 BVI-154 Nominal power Power supply V.ph.Hz 230.1.50 Nominal motor r.p.m. 1 340 1 370 1 350 Number of turbines Turbine Ø Turbine width Amount Front area 0.26 0.29 0.352 0.228 0.279...
Correcting factors for the heating capacities Indoor unit intake tem- Outdoor unit air temperature °C WB perature °C DB 1.20 1.04 0.96 0.77 0.58 1.25 1.10 1.00 0.80 0.69 1.30 1.13 1.04 0.83 0.63 Correction of the real temperature of intake air to the outdoor unit for flows that differ from the nominal values.
Sensible cooling capacities Sensible capacity (W) Compressor Humid Total Dry intake air temperature to coil °C (DB) absorbed Dry outdoor air intake air tem- capacity Model power temperature perature °C (DB) °C (WB) 9 360 2 879 3 876 5 370 6 363 2.01 19.5...
Page 17
Sensible cooling capacities Sensible capacity (W) Compressor Total Humid Dry intake air temperature to coil °C (DB) absorbed outdoor air capacity intake air tem- Model power temperature perature °C (DB) °C (WB) 12 300 3 797 5 073 6 988 8 266 3.55 19.5...
Sensible cooling capacities Sensible capacity (W) Compressor Humid intake Dry outdoor air Total Dry intake air temperature to coil °C (DB) absorbed temperature air temperature capacity Model power °C (DB) °C (WB) 16 320 5 113 6 642 8 935 10 466 4.20 19.5...
Page 19
Fan services, indoor units Air flow Absorbed Static Model Fan speed power pressure available (1) Pa 2 880 0.80 2 720 0.75 High 2 550 0.71 2 400 0.66 2 450 0.68 2 340 0.65 Medium BLI-154 2 230 0.62 2 100 0.58 2 190...
Page 20
Fan services, indoor units Air flow Static pressure Absorbed Model available power speed (1) Pa 4 380 1.22 1 090 4 240 1.18 1 020 High 4 060 1.13 3 960 1.10 3 040 0.84 BCI-154 2 950 0.82 Medium 2 770 0.77 2 670...
Electrical characteristics Outdoor units Power supply V.ph.Hz. Consumption A Minimum Automatic power supply switch Outdoor Model Compressor cable section (2) (K curve) (1) Compressor Start Outdoor Nominal BCHO-74G 230.1.50 BCHO-94G 230.1.50 230.3.50 230.1.50 BCHO-104G 400.3.50 230.3.50 13.1 BCHO-154G 400.3.50 Important: Automatic switch dimensioning and power supply and operating line sections are orientative and should be corrected in accordance with conditions at job site, length between units and legislation in force.
Accessories Standard accessories BLI-74 BLI-124 BCI-74 BCI-74 Accessory BVI-74 BVI-104 BVI-154 BCI-154 and 104 and 154 and 104 to 154 Duct electric heater 5 kW 230.1.50 Duct electric heater 5 kW 400.3.50 Internal electric heater 5 kW 230.1.50 Internal electric heater 5 kW 400.3.50 Internal electric heater 10 kW 400.3.50...
Duct electric heaters for BLI-74 to 154 - Galvanised sheet casing, covers and supports. - Exposed nickel-chrome wire electric resistances mounted These duct electric heaters are designed to provide backup on steatite supports. or complementary heat in the BLI indoor units. On and off - Power supply contactor with a 230 V coil.
General characteristics Automatic Power supply Front Pressure switch cable section Consump- Power supply Power Stages surface drop (3) Heater (1) Q1 tion model V.ph.Hz BLI-74 and 104 230.1.50 0.145 BLI-124 400.3.50 0.145 BLI-154 400.3.50 0.193 Notes: 1.- K curve (DIN, VDE 0660-104). 2.- Based on copper conductors. 3.- Considered the nominal air flow of the indoor section. Dimensions with packing and weights Dimensions with packing mm.
Internal electric heaters for BCI-74 to ponents: - Galvanised sheet casing and supports. - Exposed nickel-chrome wire electric resistances mounted These internal electric heaters are designed to provide on steatite supports. backup or complementary heat in the BCI units. On and off - Power supply contactor with a 230 V coil.
General characteristics Pressure Automatic Power supply Front Consump- drop switch Power supply cable section Power Stages surface tion (1) Q1 Heater model V.ph.Hz BCI-74 and 104 230.1.50 0.19 BCI-124 400.3.50 0.19 BCI-154 and 174 400.3.50 0.30 BCI-154 and 174 400.3.50 0.30 Notes: 1.- K curve (DIN, VDE 0660-104).
Internal electric heaters for BVI-74 to - Galvanised sheet casing and supports. - Exposed nickel-chrome wire electric resistances mounted on steatite supports. These internal electric heaters are designed to provide - Power supply contactor with a 230 V coil. backup or complementary heat in the BVI units. On and off - A manual reset thermal protector, accessible from the cycles are governed by the air conditioning equipment control inside, that disconnects the power supply contactor when...
General characteristics Automatic Power Front Pressure Consump- Power supply Power Stages supply cable switch (1) surface drop (3) tion section (2) Heater model V.ph.Hz BVI-74 and 104 230.1.50 0.19 BVI-104 400.3.50 0.19 BVI-154 400.3.50 0.30 Notes: 1.- K curve (DIN, VDE 0660-104). 2.- Based on copper conductors. 3.- Considered the nominal air flow of the indoor section. Dimensions with packing and weights Dimensions with packing mm.
Octopus Plenum For the purpose of reducing installation noise level and avoiding water condensation, the OCTOPUS plenum is lined, The OCTOPUS air distribution plenum is designed to be fitted internally, with a coating of insulation. This accessory includes directly to the impulse nozzle of the BLI indoor units. This al- all nuts and bolts required for fastening same.
Dimensions with packing and weights Dimensions with packing mm. Approx. Plenum weight kgs. Height Width Depth OCTOPUS 1150 Installation 7) Turn the BLI unit fan on and check correct air flow distribu- tion. Install the OCTOPUS plenum as follows: 1) Turn off the power supply to the air conditioning unit. Zone control 2) Unpack the accessory and make sure it was not damaged The zone control system for the BLI indoor units is designed...
Page 41
Technical specifications - Override of timer in test runs. The standard zone control accessory is comprised of the - Advanced surface assembly technology with RFI and EMI following elements: protection. Modulpak Classic SZL electronic panel OCTOPUS impulse plenum Designed for low-cost zoning of air conditioning installations. Made of galvanised sheeting and with internal insulation Its main characteristics are as follows: to reduce noise level and avoid condensations of humidity.
Dimensions with packing and weight to be fastened to the ceiling. 4) Fit four 6MA support bolts to the ceiling. Height Width Depth Weight kg. 5) Mount the three dampers in the plenum as indicated in MODULPAK the General Dimensions diagram. 1150 6) Fasten the plenum-damper assembly to the ceiling and Installation...
Need help?
Do you have a question about the YORK BCHO-74G and is the answer not in the manual?
Questions and answers