Marking/Certification; Marking; Certification - MSA Ultra Elite-PF Operating Manual

2.2

Marking/Certification

Marking

The mask is marked on the outer face blank as shown in Fig. 2:
4
Fig. 2 Marking of mask body
1 Mask Version
2 Part Number
3 Marking [date code, serial number]
4 CE-marking with notified body number
[DEKRA EXAM, Zertifizierungsstelle Dinnendahlstr. 9, 44809 Bochum]
5 X: ATEX classification A, B or C according to the Lens typ.
6 EN standard, class

Certification

Mask with Lenses from Polycarbonate with Silicate Coating
The masks according to chapter 2.1
comply with the following directives, standards or standardised documents:
Directive 2014/34/EU [ATEX]
Directive 89/686/EC or
Regulation (EU) 2016/425,
respectively
DEKRA EXAM GmbH, Dinnendahlstr. 9, 44809
Bochum, Germany, Notified body number: 0158
The Declaration of Conformity can be found under the following link: https://MSAsafety.com/DoC
: BVS 05 ATEX H 027 X
for masks
I M1
II 1 G IIA T6 -40 °C  Ta  +60 °C
II 1 D
EN 136 CL3+
:
0158
Ultra Elite Full Face Mask – Positive Pressure
1
2
3
5
6
Description
GB
7