Table of Contents
Advertisement
Unpacking & Inspection
UNPACKING & INSPECTION
Upon opening the shipping container, visually inspect the product and applicable accessories for any physical damage such
as scratches, loose or broken parts, or any other sign of damage that may have occurred during shipment .
N
OTEE:
If damage is found, request an inspection by the carrier's agent within 48 hours of delivery and file a claim with the
carrier . A claim for equipment damage in transit is the sole responsibility of the purchaser .
INSTALLATION
Mechanical
The Series 3100 flow monitor can be either panel mounted or wall mounted .
Location
In any mounting arrangement, the primary concern is easy viewing and convenient keypad operation . The flow monitor
generates very little heat, so no consideration need be given to cooling or ventilation . However, prolonged direct sunlight can
damage the front panel so some level of shading is recommended, especially if installed in a tropical climate .
Panel Mount Installation
The Series 3100 panel mount monitor is designed for through-panel mounting, which allows access to the back of the unit .
The monitor is secured to the panel by two draw brackets .
Page 6
Figure 1: Panel mounting
3.49 in.
(88.7 mm)
4.31 in.
(109 mm)
3.78 in.
(96 mm)
Data
Industrial
R
Series 3100
A BadgerMeter, Inc. Company
3.78 in.
(96 mm)
Relay 1
Relay 2
Relay 3
Relay 4
Pulse Out
Menu
Enter
TX RX
Figure 2: Physical dimensions and panel cutout
CTL-UM-01026-EN-05
3.57 in. to 3.60 in.
(90.6 mm to 91.4 mm)
3.57 in. to 3.60 in.
Panel Cutout
(90.6 mm to 91.4 mm)
4.79 in.
(122 mm)
3.49 in.
(88.7 mm)
October 2017
Advertisement
Table of Contents
