Programming; 6.1 Selection Screens; 6.2 Option List Screens; Data Entry Screens - Badger Meter Data Industrial 3100 Series User Manual

Programming

PROGRAMMING
Selection Screens
Press MENU while the normal display is shown to access the programming mode . In this mode, press one of the three arrow
keys () to select the option displayed above that key . On option list screens, use the arrows to scroll through a list of
choices, like a pull-down menu . Note that most screens presenting choices show three choices, one for each arrow button .
When the number of choices exceeds three, a small arrow () appears in the upper right side of the display to indicate more
choices on that level . Press ENTER to toggle to the next set of choices . Once a selection has been made, press ENTER to
complete the selection . Press MENU to return to the Normal screen . For example: Press MENU from the Normal screen to
display the "RESET SETUP DIAG" screen .

6.1 Selection Screens

6.1 Selection Screens
6.1 Selection Screens
Press  to display the Reset screens,  to display the Setup screens and  to display the Diagnostic screens . If  is pressed,
the following screen appears:
Option List Screens
Units of measure is an example of an options list .
Press  to scroll up the list, and  to scroll down through the list . In this case, starting with GPM; gal/s; gal/hr; LPM; ending in
a selection of custom units . Press ENTER to complete the selection . Press MENU to leave the selection unchanged .

6.2 Option List Screens

6.2 Option List Screens
The  key has no function on this type of screen .
6.2 Option List Screens

Data Entry Screens

Some screens are data entry screens, such as setpoints or custom units . When a data screen is initially displayed, the current
value will be displayed . The cursor will be flashing the left-most digit . Press  to increase a value, and  to reduce a value .
If the cursor is flashing on the decimal point, press  to move the decimal point to the right, press  to move the decimal to
the left . 6.3 Data Screens
6.3 Data Screens
6.3 Data Screens
Page 14
SETUP
SETUP
SETUP
PWORD DSPY FLOW1
PWORD DSPY FLOW1
PWORD DSPY FLOW1
Menu Enter
Menu Enter
Menu Enter
Figure 13: Selection screen
Flow 1 units
GPM
Flow 1 units
Flow 1 units
GPM
GPM
Menu Enter
Menu Enter
Menu Enter
Figure 14: Options list screen
Set point
1.00000000
Set point
Set point
1.00000000
Menu Enter 1.00000000
Figure 15: Data entry screen
Menu Enter
Menu Enter
CTL-UM-01026-EN-05 October 2017