Installing Memory Modules - Dell PowerEdge E02B Owner's Manual

Figure 16. Ejecting the memory module
1. memory module
3. memory-module socket
CAUTION: Handle each memory module only by the card edges, making sure not to touch
the middle of the memory module or metallic contacts.
5. Remove the memory module from the socket.
Figure 17. Removing the memory module
1. memory module
6. Install the sled in the enclosure.
7. Turn on the sled.

Installing memory modules

WARNING: The memory modules are hot to touch for some time after the system has been
powered down. Allow the memory modules to cool before handling them. Handle the memory
modules by the card edges and avoid touching the components or metallic contacts on the
memory module.
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Turn off the nodes using the operating system commands, or the iDRAC, or the CMC.
42
2. memory-module socket ejectors (2)