Figure 8. Enhanced network adapter isolation configuration
Table 8. Enhanced network adapter isolation configuration icon description
Icon
Node to I/O module port mapping for the enhanced network isolation configuration
In this configuration, each of the four nodes on an FM120x4 system is mapped to a single port on the I/O
module. The network traffic from the nodes in the compute sled to the I/O modules in the enclosure is
routed through a network switch that is embedded on the compute sled system board.
Figure 9. Node to I/O module port mapping for the enhanced network isolation configuration
Table 9. I/O module port mapping — FM120x4
FM120x4
1
2
Description
Network path
IO Module A1 (Top)
1a, 1b
2a, 2b
IO Module A2 (Bottom)
1c, 1d
2c, 2d
31