CommScope Node AM4 Manual page 64

Lift out the power supply
carefully with the lower part
first.
Disconnect the cables and
carefully lift the safety clips for
the disconnection.
1 mains cable (AC – or DC)
2 secondary cable (DC)
 with safety clip
2 3)
3 I C bus cable
 snap-in clip / no safety clip
1) To disconnect the mains cable, observe the precautions illustrated on the next page.
2)
To disconnect cable, press metal-holder safety clip to the rear!
3)
Observe that the snap-in clip of I
cable.
Page 64
1)
2)
2
C bus cable has to be pressed while loosening the
MF0121ACP_uc.docx
3
1
Metal-holder safety clip
Manual for Node AM4
5. Maintenance
2