Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for CommScope PSR 700
Summary of Contents for CommScope PSR 700
- Page 1 User’s Manual Public Safety Repeaters PSR 700/800 MF0123A1F...
- Page 2 DISCLAIMER: This document has been developed by CommScope and is intended for the use of its customers and customer support personnel. The information in this document is subject to change without notice. While every effort has been made to eliminate errors, CommScope disclaims liability for any difficulties arising from the interpretation of the information contained herein.
-
Page 3: Table Of Contents
HEALTH AND SAFETY 1.3. PROPERTY DAMAGE WARNINGS 1.4. COMPLIANCE 1.5. ABOUT COMMSCOPE 1.6. CONTACTING COMMSCOPE 1.6.1. CommScope Mobility Solutions (CMS) Technical Support 1.6.2. Accessing DCCS User Documentation 1.6.3. Technical Training 2. INTRODUCTION 2.1. PURPOSE 2.2. PSR 700/800 MHZ 0.5/2W 3. FUNCTIONAL DESCRIPTION 4. - Page 4 8.3. SPECIFICATIONS 8.3.1. RF Performance 8.3.2. Mechanical Specifications 8.3.3. Power Specifications 8.3.4. Environmental and Safety Specifications 8.4. AVAILABLE CONFIGURATIONS AND SW FEATURE KEYS 8.5. SPARE PARTS 9. LIST OF CHANGES 10. INDEX Page 4 MF0123A1F_FCC_uc Manual for PSR 700/800 MHz...
- Page 5 FIGURES AND TABLES figure 3-1 System overview example of a PSR 700/800 MHz ........15 figure 3-2 Configuration of a PSR 700/800 MHz 0.5/2W, analogue variant ....16 figure 3-3 Configuration of a PSR 700/800 MHz 0.5/2W, digital variant ....16 figure 4-1 Connectors of PSR 700/800 MHz .............
-
Page 6: General
Receiver SNMP Simple Network Management Protocol Transmitter Uplink / Underwriter Laboratories UMTS Universal Mobile Telecommunication System Uninterruptible Power Supply United States of America WCDMA Wideband Code Division Multiple Access Wavelength Division Multiplex Page 6 MF0123A1F_FCC_uc Manual for PSR 700/800 MHz... -
Page 7: Health And Safety
7. Notice: Read and obey all the warning labels attached to the unit. Make sure that all warning labels are kept in a legible condition. Replace any missing or damaged labels. MF0123A1F_FCC_uc Manual for PSR 700/800 MHz Page 7... -
Page 8: Compliance
4. Notice: Installation environment: Although this unit is fully designed for proper operation in a location not protected from the weather, the intended installation location is a dry room with an ambient temperature of about 25°C (77°F). Page 8 MF0123A1F_FCC_uc Manual for PSR 700/800 MHz... - Page 9 ERP of noise on a spectrum more than 1 MHz outside of the pass band should not exceed -70 dBm in a 10 kHz measurement bandwidth. MF0123A1F_FCC_uc Manual for PSR 700/800 MHz Page 9...
- Page 10 Do not put the units into the garbage but dispose of them properly according to local and/or regional regulations. Country specific information about collection and recycling arrangements per the Waste Electrical and Electronic Equipment (WEEE) Directive and implementing regulations is available on CommScope’s website. http://www.commscope.com/About-Us/Corporate-Responsibility-and-Sustainability/Environment/#recycling Page 10 MF0123A1F_FCC_uc Manual for PSR 700/800 MHz...
- Page 11 Intended use: EU and EFTA countries Indicates conformity with the RED directive 2014/53/EU and/or RoHS directive 2011/65/EU. Indicates conformity with the RED directive 2014/53/EU and RoHS directive 2011/65/EU certified by the notified body no. 0700. MF0123A1F_FCC_uc Manual for PSR 700/800 MHz Page 11...
-
Page 12: About Commscope
1. General 1.5. About CommScope CommScope is the foremost supplier of one-stop, end-to-end radio frequency (RF) solutions. Part of the CommScope portfolio are complete solutions for wireless infrastructure from top-of-the-tower base station antennas to cable systems and cabinets, RF site solutions, signal distribution, and network optimization. For patents see www.cs-pat.com. -
Page 13: Contacting Commscope
Please register for an account if you don’t have one. Once you have access, click to select a product line link to access the documentation for that product. 1.6.3. Technical Training To access the CommScope University Training site, please use the following web address http://www.commscopeuniversity.com or scan the QR code to the right. -
Page 14: Introduction
2.1. Purpose This manual contains information and procedures for the operation of the CommScope Public Safety Repeaters PSR 700/800 MHz 0.5/2W Class A and Class B. The purpose of this document is to provide a step-by-step procedure to help experienced technicians or engineers install and commission an in-building wireless enhancement system using CommScope repeaters. -
Page 15: Functional Description
3. Functional Description 3. Functional Description The following figure shows an example of a PSR 700/800 MHz integrated into a possible network setup. The Annunciator and Battery Backup Unit (BBU)* depicted in this illustration are only examples (for DC installations) since they are not provided by CommScope and may look differently in the actual setup. -
Page 16: Figure 3-2 Configuration Of A Psr 700/800 Mhz 0.5/2W, Analogue Variant
3. Functional Description figure 3-2 Configuration of a PSR 700/800 MHz 0.5/2W, analogue variant figure 3-3 Configuration of a PSR 700/800 MHz 0.5/2W, digital variant Page 16 MF0123A1F_FCC_uc Manual for PSR 700/800 MHz... -
Page 17: Commissioning
(e.g. an appropriate BBU/UPS) has to be connected to the PSR (see chapter 4.2.10). Unless otherwise agreed to in writing by CommScope, CommScope’s general limited product warranty (http://www.commscope.com/Resources/Warranties/) shall be the warranty governing the PSRs, including the installation, maintenance, usage and operation of the PSRs. -
Page 18: Property Damage Warnings For Mechanical Installation
Specified torques must be observed for certain mounting procedures according to the following table: Type Pins Hex nuts Screws Thread Specified torques 3.3 Nm / 29.2 in lb table 4-1 Specified torques Page 18 MF0123A1F_FCC_uc Manual for PSR 700/800 MHz... -
Page 19: Wall Mounting Procedure
When the unit has been removed, the bracket can be installed on the wall as explained in the following. ⚫ Use the bracket as a template to mark the positions of the four drill holes at the mounting surface / wall: MF0123A1F_FCC_uc Manual for PSR 700/800 MHz Page 19... - Page 20 When the bracket is securely fastened to the wall, insert the PSR into the bracket by positioning the two bolts (one at each side) in the corresponding grooves of the bracket. Also, reinstall the positioning clips in case they fell off before: Page 20 MF0123A1F_FCC_uc Manual for PSR 700/800 MHz...
- Page 21 (three at each side) using the M6 Phillips (cross recess) screwdriver: Finally, use a standard 10 mm wrench (or open-ended wrench) to fasten the bolts with the M6 washers and nuts of the accessory kit: MF0123A1F_FCC_uc Manual for PSR 700/800 MHz Page 21...
-
Page 22: Electrical Installation
10. Notice: Unused connectors must be closed with their protective covers to ensure watertightness. 11. Check all cables for shorts and opens. Verify that there are no cables with loose or poor connections. RF leakage could cause oscillation to occur under some conditions. Page 22 MF0123A1F_FCC_uc Manual for PSR 700/800 MHz... -
Page 23: Connections
Connector for alarm cable LAN/Ethernet connector Connector for coverage antenna figure 4-1 Connectors of PSR 700/800 MHz * Note: Whenever they are not used, the measurement probes must be terminated with the (golden) SMA terminations. 4.2.4. Grounding (Earthing) Grounding must be carried out. -
Page 24: Connection Of The Antenna Cables
Note: To use the integrated “Donor Antenna Disconnection Alarm” (required by UL2524), the antenna and antenna cable must fulfill special requirements; see chapter 5.7.5 VSWR Check and Donor Calibration for details. Page 24 MF0123A1F_FCC_uc Manual for PSR 700/800 MHz... -
Page 25: Cleaning Procedure For Rf Cable Connectors
Caution: Eye irritant product. Risk of eye irritation. Avoid contact with eyes and skin. Wear protective clothing, especially protective glasses. 4. Clean the connector winding with lint-free wipe drenched with isopropyl alcohol. MF0123A1F_FCC_uc Manual for PSR 700/800 MHz Page 25... - Page 26 Remove protective caps from the unit connector first. 9. Remove metal chips and small particles from the mating and inner surfaces of the connector using compressed air. Page 26 MF0123A1F_FCC_uc Manual for PSR 700/800 MHz...
-
Page 27: Antenna Cable Connector Assembly
4.2.7. Antenna Cable Connector Assembly The figures in this chapter illustrate the connection procedure and do not show the actual unit. 1. What is needed for the connector assembly? a. Torque wrench. b. (Adjustable) counter wrench MF0123A1F_FCC_uc Manual for PSR 700/800 MHz Page 27... - Page 28 For angled antenna connectors use your hand to retain the cable connector Counter and fasten the coupling nut with the wrench torque wrench. Make sure only the coupling nut is turned, not the cable connector. Page 28 MF0123A1F_FCC_uc Manual for PSR 700/800 MHz...
-
Page 29: Psr Alarms Connection
Environmental characteristics: Ambient temperature: -40°C ~ +90°C IP rating: IP67 Material: Technical parameters for the alarm relays Rated current/voltage: 1A / 24VDC Contact resistance: <=100m Ohm max. Insulation resistance: 1000M Ohm min. (500VDC) MF0123A1F_FCC_uc Manual for PSR 700/800 MHz Page 29... - Page 30 The alarm is based on the donor antenna Disconnection calibration described in chapter 5.7.5 VSWR Check and Donor Alarm Calibration. Note: For possible countermeasures, please refer to chapter 6 Status LEDs, PSR Alarms, and Troubleshooting. Page 30 MF0123A1F_FCC_uc Manual for PSR 700/800 MHz...
-
Page 31: Lan Connection
5.1 “LAN Settings at Local PC”. This connector is power limited as defined by UL 2524 Chapter 44.1.2 and therefore there is no need to run the connected cable through conduit. Note: The length of the connected cable must not exceed 30 meters (98.5 ft). MF0123A1F_FCC_uc Manual for PSR 700/800 MHz Page 31... -
Page 32: Power Connection
(without being wound up) from the opening in the cabinet to the power connectors (N, L). In that way the air gap can be kept as shown in the example above. Page 32 MF0123A1F_FCC_uc Manual for PSR 700/800 MHz... -
Page 33: Figure 4-5 Dc Wires, Installed
0.75 A 3.5 A Examples suitable 3 A Class C 7 A Class C 8 A Class C mains breakers 2 A Class K 4 A Class K 5 A Class K MF0123A1F_FCC_uc Manual for PSR 700/800 MHz Page 33... -
Page 34: Setting Up The Web Gui
PC. Setting a static IP address in the same address range (see below 192.168.1.5) is required: Access the LAN settings of your local Select Internet Protocol Version 4 PC and click Properties: (TCP/IPv4) and click Properties: → Enter the IP address. → Click OK. Page 34 MF0123A1F_FCC_uc Manual for PSR 700/800 MHz... -
Page 35: Network Management Requirements
When a user connects first time or after a factory reset, the EULA Acceptance page appears. Tag to Accept the EULA and click Continue. If you do not accept the EULA, login to the repeater is not possible. MF0123A1F_FCC_uc Manual for PSR 700/800 MHz Page 35... -
Page 36: Login Page
Critical. Clicking on the coloured alarm status field (Clear or Critical) opens the Active Alarm page (see chapter 5.7.1). • Temperature: The system temperature is displayed. Page 36 MF0123A1F_FCC_uc Manual for PSR 700/800 MHz... -
Page 37: System Settings
Configurations and SW Feature Keys. • Band Authorization: If dual band is unlocked, single band is automatically unlocked as well. • Power Level Authorization: If Power level 2 W is unlocked, 0.5W is automatically unlocked. MF0123A1F_FCC_uc Manual for PSR 700/800 MHz Page 37... -
Page 38: Software Upgrade
3 min 15 sec has to be expected. Proceed as follows: Get an update file from CommScope Technical Support (see chapter 1.6.1) and store the file at a suitable location where you can access it. Click the Choose File button and select the software update file from where you stored it previously. -
Page 39: Restore Factory Defaults
Restore: The RF Setting information is restored from the backup file. Factory Default: The RF Setting information is restored to Factory Default status. Both the Alarm History log and Event History log files are deleted, and the system is rebooted. MF0123A1F_FCC_uc Manual for PSR 700/800 MHz Page 39... -
Page 40: My Account Management
• It must contain at least one capital letter, one small letter, and one number. In case you forget or inadvertently change this information, a reset to factory defaults is required. To do so, refer to chapter 6. Page 40 MF0123A1F_FCC_uc Manual for PSR 700/800 MHz... -
Page 41: Ip Settings
To change the settings (e.g. to integrate the PSR into an existing network), type in the corresponding data and click the Save button to confirm. The following message appears: Click the OK button to confirm the changed IP Settings and the system will reboot. MF0123A1F_FCC_uc Manual for PSR 700/800 MHz Page 41... -
Page 42: Omc Connection
Heartbeat Interval time set function: 1 to 1440 min can be set. Click the Save button to confirm the changed OMC Connection settings and the PSR will reboot for the SNMP daemon to restart. Page 42 MF0123A1F_FCC_uc Manual for PSR 700/800 MHz... -
Page 43: Alarm Settings
3 minutes for "Donor Antenna Disconnection Alarm". The alarm settings cannot exceed the programmable limits indicated in the table at the beginning of chapter 5. Click the Save button to confirm the settings. MF0123A1F_FCC_uc Manual for PSR 700/800 MHz Page 43... -
Page 44: General Rf Setting
With UL squelch/mute active, the UL gain is reduced by 30 dB. With the Mute ON/OFF button, muting can be generally deactivated/activated. The button indicates the currently chosen muting status. Once you have finished RF setting, press the Save button to change the settings. Page 44 MF0123A1F_FCC_uc Manual for PSR 700/800 MHz... -
Page 45: Channelized Alc (Class A Only)
* Filters above 75 kHz are only available in Class B mode. For a detailed explanation on using this mode, refer to chapter 5.6.12 and strictly observe the important COMPLIANCE Notice in this chapter. MF0123A1F_FCC_uc Manual for PSR 700/800 MHz Page 45... -
Page 46: 800 Mhz Channels (Class A Only)
* Filters above 75 kHz are only available in Class B mode. For a detailed explanation on using this mode, refer to chapter 5.6.12 and strictly observe the important COMPLIANCE Notice in this chapter. For filter details also observe table 8-1 Digital filters (narrowband) for Class A repeaters. Page 46 MF0123A1F_FCC_uc Manual for PSR 700/800 MHz... -
Page 47: Digital Channels (Class B Mode)
47 CFR 90.219) online at www.fcc.gov/signal-boosters/registration. To use the Class B mode, simply choose a filter above 75 kHz (marked in red), observe the WARNING message, and accept it by pressing Ok. MF0123A1F_FCC_uc Manual for PSR 700/800 MHz Page 47... -
Page 48: Site Location
Save with PC Time: Save the date/time of the connected PC to the device (you should have set the Time Zone before). Note Date/Time is reset if PSR power is off for more than 2 days. Page 48 MF0123A1F_FCC_uc Manual for PSR 700/800 MHz... -
Page 49: Summary
The user can download the summary to PC by using the "Create Report" button located at the end of the summary. Summary File: The summary file is named as occurred date and time and the file is saved in the chosen folder, e.g. summary_190729AA0005_20201117_1509.html. MF0123A1F_FCC_uc Manual for PSR 700/800 MHz Page 49... -
Page 50: System Operation
When Alarm Test is switched ON, a 10-minute counter starts. After the counter has reached zero, the alarm test is switched OFF automatically. The individual remaining time is displayed in the Test Duration column. Temperature Alarm test is not available. Page 50 MF0123A1F_FCC_uc Manual for PSR 700/800 MHz... -
Page 51: Alarm History
Alarm History Search Function: You can search by Event Date, Alarm Item, Alarm Trigger, and Alarm Level, e.g. when Manual AMP is entered in the Search window, only the detected alarm is displayed. MF0123A1F_FCC_uc Manual for PSR 700/800 MHz Page 51... -
Page 52: Event History
PC, and then perform the download function by compressing all of the Event Log files at one time. Event History Search Function: You can search by Event Date, Event, and User Name. Page 52 MF0123A1F_FCC_uc Manual for PSR 700/800 MHz... -
Page 53: Antenna Isolation Check
The shading will change from green to red in case of an alarm. The threshold (RL Threshold) under which an alarm will be generated can be set in the General RF Setting (see chapter 5.6.8). MF0123A1F_FCC_uc Manual for PSR 700/800 MHz Page 53... -
Page 54: 700Mhz Band Overview
This page shows the current 800 MHz band setting and the Input/Output Power Level. If you want to check the status again, you can click the 800 MHz Band menu button or F5 Key to perform the status check. Page 54 MF0123A1F_FCC_uc Manual for PSR 700/800 MHz... -
Page 55: Status Leds, Psr Alarms, And Troubleshooting
Do not use the HW Reset button in the unit for this purpose, as it will set back all data to factory defaults. Only use the HW button (as described in chapter 7.2) if the IP address or password was inadvertently changed or forgotten. table 6-1 Status LED indication and troubleshooting MF0123A1F_FCC_uc Manual for PSR 700/800 MHz Page 55... -
Page 56: Maintenance
Unless otherwise agreed to in writing by CommScope, CommScope’s general limited product warranty (http://www.commscope.com/Resources/Warranties/) shall be the warranty governing the unit, including the installation, maintenance, usage and operation of the units. -
Page 57: Reset To Factory Defaults
30min Thus, you can login to the Web GUI with the default password again. Note: Do not forget to close the cabinet, latch the two locks and lock them with the key. MF0123A1F_FCC_uc Manual for PSR 700/800 MHz Page 57... -
Page 58: Cleaning The Heat Sink
Do not touch the unit before it has sufficiently cooled down. Use a soft brush to remove dust and dirt from the fins of the heat sink. After cleaning reconnect power cable. Page 58 MF0123A1F_FCC_uc Manual for PSR 700/800 MHz... -
Page 59: Appendix
BDA: DC operating range -62 to -34 VDC AC input rating 104 ~ 240 VAC AC operating range 89 to 264 VAC 8.2. Illustrations figure 8-1 External configuration MF0123A1F_FCC_uc Manual for PSR 700/800 MHz Page 59... -
Page 60: Figure 8-2 Cabinet Measurements
8. Appendix figure 8-2 Cabinet measurements Page 60 MF0123A1F_FCC_uc Manual for PSR 700/800 MHz... -
Page 61: Figure 8-3 Cabling Plan (With Bbu For Dc Installations)
AC installations using a UPS is the same (for details on the UPS installation, refer to the corresponding installation manual of the UPS): figure 8-3 Cabling plan (with BBU for DC installations) MF0123A1F_FCC_uc Manual for PSR 700/800 MHz Page 61... -
Page 62: Specifications
0.5 W type 21/21 dBm / carrier @ 4 carriers 18/18 dBm / carrier @ 8 carriers All figures are typical values, unless otherwise stated. All data is subject to change without notice. Page 62 MF0123A1F_FCC_uc Manual for PSR 700/800 MHz... - Page 63 40 dBc @ ±2 MHz 800 MHz 10 MHz 18 MHz table 8-3 Selectable passbands for class B repeaters All figures are typical values, unless otherwise stated. All data is subject to change without notice. MF0123A1F_FCC_uc Manual for PSR 700/800 MHz Page 63...
-
Page 64: Mechanical Specifications
1.63 – 2.97 A Current (Single Band) operating range 2.13 – 3.88 A Current (Dual Band) All figures are typical values, unless otherwise stated. All data is subject to change without notice. Page 64 MF0123A1F_FCC_uc Manual for PSR 700/800 MHz... -
Page 65: Environmental And Safety Specifications
A, B and DC, AC type. A detailed list of available configurations is provided below. Class A: AC Configurations ID No. PSR 700 OR 800 MHZ 2W CLASS A AC 7831758-0001 PSR 700 AND 800 MHZ 2W CLASS A AC 7831758-0011 PSR 700 OR 800 MHZ 0.5W CLASS A AC... -
Page 66: Spare Parts
0.5W, Dual Band 7835689 0.5W, Single Band 785359 Lock Device Note: In order to get new feature keys, contact CommScope Technical Support (see chapter 1.6.1). 8.5. Spare Parts The following spare parts are available for the PSR 700/800 MHz: Material ID... -
Page 67: List Of Changes
5.6.10 and 5.6.11 - Chapter 5.6.12 on Class B mode added MF0123A1F 15-April-2021 - Additional filters added in table 8-1 - Restriction for Canada removed in chapter 8.3.1 (editorial) MF0123A1F_FCC_uc Manual for PSR 700/800 MHz Page 67... -
Page 68: Index
Power .............. 65 Declaration of Conformity (DoC) ......12 Status LEDs ............55 Functional description ........... 15 Troubleshooting ............ 55 Grounding (Earthing) ..........23 UL Squelch ............44 Health and Safety ........... 7 Page 68 MF0123A1F_FCC_uc Manual for PSR 700/800 MHz...
Need help?
Do you have a question about the PSR 700 and is the answer not in the manual?
Questions and answers