About Commscope - CommScope Node AM4 Manual

1.5. About CommScope

CommScope is the foremost supplier of one-stop, end-to-end radio frequency (RF)
solutions. Part of the CommScope portfolio are complete solutions for wireless
infrastructure from top-of-the-tower base station antennas to cable systems and cabinets,
RF site solutions, signal distribution, and network optimization. For patents see www.cs-
pat.com.
CommScope has global engineering and manufacturing facilities. In addition, it maintains
field engineering offices throughout the world.
Andrew Wireless Systems GmbH based in Buchdorf/Germany, which is part of
CommScope, is a leading manufacturer of coverage equipment for mobile radio networks,
specializing in high performance, RF and optical repeaters. Our optical distributed
networks and RF repeater systems provide coverage and capacity solution for wireless
networks in both indoor installations and outdoor environments, e.g. tunnels, subways,
in-trains, airport buildings, stadiums, skyscrapers, shopping malls, hotels and conference
rooms.
Andrew Wireless Systems GmbH operates a quality management system in compliance
with the requirements of ISO 9001 and TL 9000. All equipment is manufactured using
highly reliable material. To maintain highest quality of the products, comprehensive
quality monitoring is conducted at all fabrication stages. Finished products leave the
factory only after a thorough final acceptance test, accompanied by a test certificate
guaranteeing optimal operation.
Hereby Andrew Wireless Systems declares that the radio equipment type Repeater is in
compliance with Directive 2014/53/EU.
The full text of the EU declaration is available at the following internet address:
www.commscope.com/collateral/Declarations_of_Conformity/.
According to the DoC, our "CE"-marked equipment can be used in all member
states of the European Union.
Note: Exceptions of and national deviations from this intended use may be
possible.
regulations, please refer to the respective documents (also in national
language) which are included in the manual CD delivered.
To make the most of this product, we recommend you carefully read the instructions in
this manual and commission the system only according to these instructions.
For technical assistance and support, please also contact the local office or CommScope
directly at one of the addresses listed in the following chapter.
Page 14
To observe corresponding
MF0121ACP_uc.docx
1. General
local particularities
Manual for Node AM4
and