Playing The Factory Preset Patterns; Muting The Tracks; Tempo; The User Interface - Elektron Digitone Keys Quick Manual

2.3 PLAYING THE FACTORY PRESET PATTERNS

You can find a number of preset patterns and Sounds in the Digitone Keys. Follow the
instructions below to start exploring your new instrument.
1. Press [BANK] and then press [TRIG 9] key to select bank A. The screen reads
"BANK A : SELECT PTN".
2. Press [TRIG 1] to select the first pattern of bank A.
3. Press [PLAY] to listen to pattern A01.
4. Press [PTN] and then press [TRIG 2] key to select pattern A02, and so on. The new
pattern starts once the previous pattern has reached its end.
White [TRIG] keys indicate pattern positions that contain data. A red [TRIG] key indicates
the current active pattern. Empty patterns [TRIG] keys are unlit.

2.4 MUTING THE TRACKS

You can mute/unmute any of the sequencer tracks. You can mute/unmute all tracks
simultaneously. Press [FUNC] + [T1–4] to mute a track. Press [FUNC] + [T1–4] to unmute
a muted track.

2.5 TEMPO

To change the BPM setting, press the [TEMPO] key to open the TEMPO menu. Use the
LEVEL/DATA knob to change tempo.

3. THE USER INTERFACE

The screen shows all the information needed for real-time interaction and editing on the
Digitone Keys. The eight DATA ENTRY knob parameters shown vary depending on which
parameter page you have selected. Here you can see the main interface screen of the
SYN1 page.
15