Elektron Digitone Keys Quick Manual page 11

19. [TRACK] [T1–4] keys. Selects the active track. The secondary function mutes the track.
20. The [ARROW] keys. Used for navigation and for setting parameter values. In menus,
they are called [UP], [DOWN], [LEFT], and [RIGHT].
21. [TRIG] keys enter or remove sequencer trigs and parameter locks, in combination with
the DATA ENTRY knobs. They also select banks, and patterns, in combination with
the [PTN], and [BANK] keys. The [TRIG] keys also function as a keyboard to play the
Digitone Keys or to input notes chromatically into the sequencer.
22. [STOP] stops the sequencer playback. The secondary function is a paste operation.
23. [PLAY] starts the sequencer playback. The secondary function is a clear operation.
24. [RECORD] key. Activates/deactivates GRID RECORDING mode. Press and hold
[RECORD], and then press [PLAY], to activate LIVE RECORDING mode. Press and
hold [RECORD], and then press [PLAY] twice to activate/deactivate quantized LIVE
RECORDING. The secondary function is a copy operation.
25. [BANK] selects bank A–H in combination with the [TRIG 9–16] keys. The secondary
function accesses the MUTE Mode.
26. [PTN] selects pattern 1–16 in combination with the [TRIG 1–16] keys. The secondary
function opens the METRONOME menu.
27. [MOD] key. Opens the MOD WHEEL parameter assign menu. The secondary function
mutes the modulations made with the MOD WHEEL.
28. [OCT-/+] transposes the [KEYBOARD] range up or down one octave. The <OCTAVE>
LEDs shows the current transposition. The secondary function transposes sequencer
notes up or down one octave.
29. [PTCH] key. Opens the PITCH WHEEL parameter assign menu. The secondary
function mutes the modulations made with the PITCH WHEEL.
11