Network | Lan Setting - Telrad CPE9000 System Manual

Network | LAN Setting

LAN Setting:
●
➢
LAN IP Address / Subnet Mask: The IP address and subnet mask used by CPE in LAN
◆ If users choose "L2TP with BCP Enabled" in "Operation Mode", this IP only
means a back-up IP address. When users cannot link to CPE web GUI due to the
dynamic IP address, users can use the back-up IP address to link to CPE web
GUI instead.
◆ If users choose other tunnel mode, this IP means LAN side domain and Web
GUI IP address.(This IP will change IP prefix in "DHCP Server" , "Port
Forwarding" and "Port Trigger")
DHCP Server: (Available in NAT, Tunnel, Router Mode)
●
LTE Outdoor CPE | User Manual
Network > LAN Setting
61
P.