Sim Status; Installation - Telrad CPE9000 System Manual

SIM status

LTE Status LED :
Link Status 1
Link Status 2
Link Status 3

Installation

Selecting a Location: LTE Outdoor CPE should be pole-mounted outdoors and aligned
●
so its antenna faces the nearest LTE eNodeB. When selecting a suitable location for the
unit, consider these guidelines:
• Place LTE Outdoor CPE as high as possible to achieve the best possible link quality.
• Place the LTE Outdoor CPE away from power and telephone lines.
• Avoid placing LTE Outdoor CPE too close to any metallic reflective surfaces.
• Be sure to ground LTE Outdoor CPE with an appropriate grounding wire (not
included) by attaching it to the grounding screw on the unit and to a good ground
connection.
LTE Outdoor CPE | User Manual
Green
○○●
○○○
Red
○○○
○○
●
Red/
○○○
Yellow
●●○
Red/
○○○
Yellow/
●●●
Green
16
P.
Steady ON
Blinking when
On-hook
OFF
When CPE is power on, each LED
indicates each link status
Steady ON
Steady ON
Steady ON
SIM Detected
PUK / PIN Code
No SIM Detected
SINR < 9dB
9dB < SINR <
16dB
16dB < SINR