About This Guide; Prerequisite Skills And Knowledge; Conventions Used In This Document - Telrad CPE9000 System Manual

About this Guide

This document provides information and procedures on the installation and configuration of
Telrad Outdoor CPE9000. You could utilize the information in this guide to set up your device.

Prerequisite Skills and Knowledge

To use this document effectively, you should have a working knowledge of Local Area
Networking (LAN) concepts and wireless Internet access infrastructures. In addition, you
should be familiar with the following:
● Hardware installers should have a working knowledge of basic electronics and mechanical
assembly, and should understand related local building codes.
● Network administrators should have a solid understanding of software installation
procedures for network operating system and troubleshooting knowledge. LTE CPE has a
web GUI which supports http/https protocol; it could be used to configure the CPE settings
through the web browser by user's PC. Please refer to the following pages for more detail.

Conventions Used in this Document

The following typographic conventions and symbols are used throughout this document:
Very important information. Failure to observe this may result in
damage.
Important information that should be observed.
Additional information that may be helpful but not required.
bold
Menu commands, buttons and input fields are displayed in bold
LTE Outdoor CPE | User Manual
10
P.