Initialization; Additional Notes - Realtek RTL8100 Programming Manual

3 Initialization

Though transmit reset and Receive reset can be done individually, there are three steps in the initialization procedure.
1. Enable Transmit/Receive (RE/TE in CommandRegister)
2. Configure TCR/RCR.
3. Enable IMR.

Additional Notes

This section covers some information on the source code provided.
1. This sample code has been developed under Borland C 3.0, and the debugging process was accomplished under Softice
for DOS. All testing is done under DOS(win98).
2. To enable source code debugging under Softice, the compiling/linking process needs to generate a '.map. file. Softice
provide a 'msym' program to translate '.map' files to '.sym' files. After the '.sym' file is generated, load the demo
program with 'Ldr demo'.
Realtek Semiconductor Corp.
Headquarters
1F, No. 2, Industry East Road IX, Science-based
Industrial Park, Hsinchu, 300, Taiwan, R.O.C.
Tel: 886-3-5780211 Fax: 886-3-5776047
WWW: www.realtek.com.tw
2001/12/10
10
RTL8100
Rev.1.0