Table of Contents
Advertisement
Setup
2.2
LP8863EVM Setup
External power must be provided to the board. Connect a standard type-A plug from the PC to a Mini-B
plug, which goes to the EVM connector. The I
that the LP8863-Q1 device requires.
6
The LP8863EVM Evaluation Module
Figure 3. LP8863EVM With LED Load Board Connected
Copyright © 2017, Texas Instruments Incorporated
2
C-compatible interface program provides all of the controls
www.ti.com
SNVU558 – February 2017
Submit Documentation Feedback
Advertisement
Table of Contents
