Description Of The Product - Siemens SIMATIC NET CP 5603 Operating Instructions Manual

Operating Instructions (compact) CP 5603
2.3

Description of the product

The following illustration shows the CP 5603 communications processor with active RS-485
module:
12-pin ribbon cable
Aktive RS-485
module
CP 5603 communications processor
The CP 5603 communications processor has the following characteristics:
● PCI-104 interface
● Fast commissioning with Plug & Play capability
● DP master mode (DP base) with up to 124 DP slaves with full data consistency
● Relief for the PC due to event mechanisms (automatic detection of data changes)
● "Fast Logic" support: Automatic linking of input and output data can be set by the user
● Support of all data transmission speeds from 9.6 kbps to 12 Mbps according to the
● LEDs
● Support of PCI-104 5 V, 33 MHz. (If the PCI signal voltage is 3.3 V, the host must provide
● Floating active RS-485 connector with 12-pin ribbon cable
30
Status LEDs
PROFIBUS standard
a 5 V power supply for the PCI-104 modules.)
PCI-104
mother board
Address switch
PCI-104 connector
CP 5603 Operation Instructions (compact)
A5E02146341A-01