Siemens SIMATIC NET CP 5603 Operating Instructions Manual page 39

CSA approval
The CP 5603 is approved in accordance with standard CAN/CSA C22.2 No. 60950-1.
UL approval
The CP 5603 is approved according to:
•
•
Note for Australia (C-TICK)
The CP 5603 meets the requirements of the AS/NZS 3548 standard.
Installation guidelines
The CP 5603 has the approvals listed above only if you keep to the instructions in Chapter
4 and the safety notices in this document and in the "PROFIBUS Network Manual" during
installation and operation.
Note
The product was tested in a device that also meets the standards listed above.
When operating the module in a device that does not meet these standards, there can be no
guarantee that the values will be achieved.
CP 5603 Operation Instructions (compact)
A5E02146341A-01
UL 60950-1
UL 508
Caution
Operating Instructions (compact) CP 5603
39