Compatibility With The Previous Product; Extended Functionality Compared With Previous Product - Siemens SIMATIC NET 6GK7 443-5FX02-0XE0 Manual

6

Compatibility with the Previous Product

6.1 Extended Functionality Compared with Previous
Product:
The CP 443-5 Basic (6GK7 443-5FX02-0XE0) described here can be used as a
replacement for the previous products CP 443-5 Basic (6GK7 443-5FX01-0XE0
and 6GK7 443-5FX00-0XE0).
Please note the following information on the extended functionality.
Extended Functions as of 6GK7 443 - 5FX02 - 0XE0
The CP 443-5 Basic (6GK7 443-5FX02 -0XE0) is functionally identical to the
predecessor CP 443-5 Basic (6GK7 443-5FX01 -0XE0).
The new CP 443-5 Basic provides better performance compared with the
predecessor by a factor of up to 3
Extended Functions as of 6GK7 443-5FX01-0XE0
S PG bus functions in multiple subnets
If you want to use the PG bus functions in multiple subnets, you must install the
STEP 7 software version V5.0 or higher on the PG/PC.
Note: Dynamic switchover to alternative paths (for example if there is a problem
on one of the possible transmission paths) is, however, not supported.
S Time-of-day synchronization
S Use in SIMATIC S7-400H (fault-tolerant PLC)
CP 443-5 Basic for PROFIBUS / Manual Part B3
Release 11/2002
C79000-G8976-C161-04
Compatibility with the Previous Product
B3-19