Introduction - Siemens SIMATIC NET CP 5603 Operating Instructions Manual

Operating Instructions (compact) CP 5603

Introduction

Document content
These compact operating instructions contain information with which you will be in a position
to install and commission the CP 5603 communications processor.
Further documentation
You will find further documentation on the current manual collection DVD (order number
6GK1975-1AA00-3AA0) in the following documents:
Installation Instructions
SIMATIC NET PC Software CD
Configuration Manual
Commissioning PC Stations
Manuals
•
•
26
Name of the document
SIMATIC NET Industrial Communication
with PG/PC Part 1 - Basics
SIMATIC NET Industrial Communication
with PG/PC Part 2 – Interfaces
Description
This document provides you with the information
required to install the SIMATIC NET PC software
products on your PG/PC.
Contains the information required to commission
and configure a PROFIBUS communications
module.
This manual introduces you to industrial
communication and explains the available
communication protocols. There is also a
description of the OPC interface.
CP 5603 Operation Instructions (compact)
1
A5E02146341A-01