Taking The Unit Apart - Bissell PROHEAT PRO-TECH #1699 Repair Manual

Service center repair guide
Table of Contents

Advertisement

B
issell PowerSteamer® ProHeat™ Series Service Center Repair Guide

TAKING THE UNIT APART

1.
Unplug the unit.
2.
Recline the handle backwards fully.
3.
Turn SmartMix to "normal" traffic setting.
4.
Remove the Solution and Clean Water Tanks.
5.
Remove clear flow indicator cap, red spinner and filter.
6.
Remove the two screws in the nozzle window and lift the front of the window straight up
to remove.
7.
Remove four screws located on top of main housing, near the wheels.
8.
Remove the main housing from the unit (some units have snaps on front of housing -- lift
front of housing to remove these) Pressing down on flow indicator opening may help
remove housing.
9.
Ensure that rope gasket is placed properly on the housing -- reposition with a flat
screwdriver.
Printed February, 2001
1/30/2004 (Revision 1)
6

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents