Bissell ProHeat Pro-Tech 7920 Series User Manual
Hide thumbs
Also See for ProHeat Pro-Tech 7920 Series:
- User manual (25 pages) ,
- User manual (25 pages) ,
- User manual (25 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for Bissell ProHeat Pro-Tech 7920 Series
Summary of Contents for Bissell ProHeat Pro-Tech 7920 Series
- Page 1 ProHeat Pro-Tech ® ® U S E R ’ S G U I D E 7920 / 7901 SERIES 8915 / 8910 SERIES Safety Instructions Product View/Accessories Assembly 6-17 Features / Operations Routine Maintenance 17-19 Troubleshooting 20-21 Consumer Services Replacement Parts Warranty...
- Page 2 My great-grandfather invented the floor sweeper in 1876. Today, BISSELL is a global leader in the design, manufacture, and service of high quality homecare products like your ProHeat Pro-Tech. Thanks again, from all of us at BISSELL.
-
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic Use only cleaning products formulated by precautions should be observed, including BISSELL for use in this appliance the following: Keep openings free of dust, lint, hair, etc. Read all instructions before using your... - Page 4 Keep plenty of genuine BISSELL Fiber Cleansing Formula ™ and Scotchgard ™ Protector Cartridges on hand so you can clean and protect whenever Trigger it fits your schedule. Always use genuine BISSELL deep cleaning formulas. Non-BISSELL cleaning solutions may harm the machine and void the warranty.
-
Page 5: How To Use This Guide
Locate and organize all parts before assembly. Familiarize yourself with the parts and where they go. Following this User’s Guide will greatly enhance your ability to get the most performance from your BISSELL ProHeat Pro-Tech for many years. Your ProHeat Pro-Tech comes in 3, easy to assemble components. - Page 6 Special Features of your BISSELL ProHeat ® Pro-Tech ® The BISSELL SmartClean ® System The ProHeat Pro-Tech is a home cleaning system that automatically mixes hot tap water with Fiber Cleansing Formula and heats the solution as it is applied to the carpet. The combination of heated cleaning solution, powered brush and suction provide a safe and effective method of cleaning.
- Page 7 Important: If you are using the WATER RINSE / CARPET PROTECTANT setting, fill the Smart To reduce the risk of fire, Mix bottle with water also! use only BISSELL Deep Cleaning Formula for full size machines in your ProHeat Pro-Tech. Use of...
- Page 8 Tank-in-Tank Continued Lift the Tank-in-Tank handle. The handle locks the lid in place. Carry it like a bucket to fill at the sink. Lift and Carry Note: You may notice hair and debris deposits on the carpet that were loosened by the brushing action (especially with newer carpets that have never been deep cleaned before).
- Page 9 E. Replace tank lid. F. Reinsert tank assembly into unit. Refill with clean tap water as above, steps 5 through 9 on page 8, and refill the SmartMix bottle with BISSELL Cleansing Formula as necessary. Fill bladder only with clean...
-
Page 10: Machine Preparation
While pressing the trigger, slowly make several passes High Traffic. over the area to be cleaned. Caution: Do not overwet. Turn the machine Power switches OFF and let BISSELL Deep Cleaning Formula dissolve the tough soil for 1-2 minutes before continuing. -
Page 11: Carpet Cleaning
Water Rinse/Carpet Protector setting to give your carpeting a final rinse. This will ensure thorough removal of embedded dirt loosened by the Advanced Deep Cleaning Formula. BISSELL Advanced Cleansing Formulas contains an anti-resoiling agent that helps your carpets repel dirt and keeps them looking good longer. -
Page 12: Stain Removal
You may repeat this process several times. Use your BISSELL deep cleaner as a Precleaner. With one of the tools attached to hose, set the Ready Tools dial to Pretreat and the Smart Mix dial to the High Traffic setting. -
Page 13: When You're Done
Perfect Pass ™ (Available on select models only) The Perfect Pass feature is designed to help you achieve the best cleaning results when deep cleaning. Apply smooth even strokes when deep cleaning your carpets. An upright deep cleaner should not be used at the same speed as an ordinary vacuum. - Page 14 Scotchgard ™ Protector Applicator (Optional) The Scotchgard protector applicator (with formula included) can be used to help retain the carpet cleanliness you achieve with your ProHeat Pro-Tech machine. For best results the post cleaning treatment should be applied while the carpet is still wet or damp. It is recommended that the Scotchgard Protector is applied every 12 months in all carpeted areas, and after every deep cleaning for high traffic areas such as entryways and stairs.
- Page 15 Machine Preparation Tip: Set up the machine following instructions in The Use the BISSELL Features section, pages 6-9. Pet Odor and Soil Use Fiber Cleansing Formula in SmartMix tank. Removal ™...
-
Page 16: Cleaning Bare Floors
6-9. Be sure to thoroughly rinse out any remaining Fiber Cleansing Formula from the SmartMix bottle to prevent slippery linoleum, vinyl, and tile floors. Use BISSELL Floor Cleansing Formula in the SmartMix tank. Check ReadyTools dial - it should be set on Floor Cleaning. -
Page 17: Routine Maintenance
Bare Floor Cleaning Technique Slowly move the machine nozzle with Bare Floor Tool forward and back over soiled surface one time while WARNING: pressing the trigger. Caution: Do not over wet. To reduce the risk of fire, electric shock or injury Repeat the motion without pressing the trigger using the Bare unplug from outlet Floor Tool to squeegee and suction up the dirty water. - Page 18 Pump Belt Replacement Turn the machine off and unplug from the wall outlet. Step on the release pedal and recline the handle down onto floor. (see illustration). Remove Tank-In-Tank and SmartMix tanks. Set them aside (see illustration). Remove Belt Access Door located near the Floor Cleaning/ Tools switch by inserting a flat head screwdriver into the slot nearest to the handle and gently prying the access door off (see illustration).
- Page 19 Turn the machine right side up and replace the Tank-In- Tank, SmartMix tank and belt access door (see illustration).) Assembly is now complete. If you have any questions, or are having trouble installing your replacement pump belt, please call BISSELL Consumer Services at 1-800-237-7691.
-
Page 20: Troubleshooting
Possible Causes Remedies Bladder may be empty. Refill bladder with hot tap water. SmartMix bottle may be empty. Fill with BISSELL Advanced Cleaning Formula for cleaning or water if rinsing,or using the Scotchgard protector applicator. The filter may be clogged. - Page 21 Troubleshooting Continued DirtLifter PowerBrush does not turn. Possible Causes Remedies The Brush Belt or Pump Belt Turn the machine OFF and unplug from is off or broken. the outlet. To check if a Pump Belt has broken, you will need a flat head screwdriver.
- Page 22 Grand Rapids MI 49501 ATTN: Consumer Services Or visit the BISSELL website - www.bissell.com When contacting BISSELL, have model number of unit available. Please record your Model Number: ___________________ Please record your Purchase Date: ___________________ NOTE: Please keep your original sales receipt. It provides proof of date of purchase in the event of a warranty claim.
- Page 23 Replacement parts - BISSELL ProHeat ® Pro-Tech ® Item Part No. Part Name 210-9201 4” Small Area Tool 603-0910 6” Stair Tool 210-9148 Spraying Crevice Tool 210-1197 TurboBrush ® 214-9131 Bare Floor Tool 014-9142 PreTreat Wand 215-9155 Tough Stain Brush...
-
Page 24: About Your Warranty
User's Guide is not covered. If your BISSELL product should require service: Call BISSELL Consumer Services at the number below or visit the BISSELL website - www.bissell.com to locate a BISSELL Authorized Service Center in your area. If there are no authorized BISSELL Service Centers in your area, select the "Customer Service"...
Need help?
Do you have a question about the ProHeat Pro-Tech 7920 Series and is the answer not in the manual?
Questions and answers