Miele CS 1312 Operating And Installation Instructions page 20

Cleaning and care
Stainless steel
A non-abrasive stainless steel cleaner
is suitable for cleaning stainless steel
surfaces.
To help prevent resoiling, we
recommend a stainles steel conditioner
(see "Accessories").
Apply sparingly with a soft cloth.
Do not use stainless steel cleaning
agents on printed surfaces. This
would rub off the print. These areas
should be only cleaned with an
E-Cloth or with a solution of warm
water and a little washing-up liquid
applied with a soft sponge.
20
Racks and lava rock container
Wash the racks and lava rock container
after every use in hot water and a little
washing-up liquid. Soak to remove
heavy soiling, and then scrub clean
with a brush. Leave them to dry
thoroughly.
Do not use cleaning agents for
stainless steel on the lava rock
container.
Heating elements
Use a scouring sponge to clean any
residues left on the heating elements.
Lava rocks
Clean the lava rocks regularly.
Soak them in a suitable container in hot
water with a little washing-up liquid,
then swirl them around in the water
several times. Pour away the dirty
water, and rinse 2 or 3 times in clean
water. Lay the rocks out to dry on a
suitable towel.