JGaurora A8S User Manual page 15

While waiting for the nozzle to heat, we can install the onboard filament holder.
Note：For smooth operation, ensure the spool is installed correctly, so that it rotates clockwise during printing.
Click [IN] once
nozzle temp.
reaches 200ºC
Assemble the
holder on the
right.
Load the filament
into the filament
tube.
Tighten the screw.
14
----3D Printer User Guide
Load the filament
spool to the holder.
When the filament
comes out of the
nozzle, loading
is completed.