Filament Loading - JGaurora A8S User Manual

Press "LEVELING", the printer head to back to home automatically, then press the 4 points to make leveling, as below
showing:
Press "point 3" ,
the head move
to left front
Please Note: You may find it helpful to refer to the video demonstrating platform leveling, that is found in the
included USB stick.

4.4 Filament loading

Click [ PREHEAT ] to enter "Preheat menu"->select the relative filament to preheat. Here, we are using PLA as an
example.
Press "point 1" ,
the head move
to right back
13
----3D Printer User Guide
Press "point
2", the head
move to left
back
front
Press "point 4" ,
the head move
to right front