Flight Control - Walkera Voyager 5 Quick Start Manual

12.0 Flight Control

1) Make sure that the GPS signal is received (the blue and red LED lights blink at the same time).
2) Only when "Connected" displays on the upper bar of the main interface of he APP, you can
perform APP operation.
3) Please unlock motors before takeoff. (refer to Page 12 for the detailed method)
AUTO Takeoff (Remote Controller or APP Operation)
Switch to "Take off" Short press the Enter key,
position aircraft will take off
automatically.
Attention:
1) Auto Takeoff is usable only under AUTO mode or SPORTS mode.
2) Auto takeoff default to 3.5m altitude, and it can be removed by pushing the throttle to midpoint or above,
whenever manual control over the throttle is needed.
AUTO Landing (Remote Controller or APP Operation)
Switch to "Landing" Short press the Enter key,
position aircraft will land
automatically.
Attention:
1) During landing, you can operate the aircraft forward, backward, rightward and leftward.
2) During the landing process, please switch the flight mode of the remote controller if landing needs to be cancelled.
GPS mode (Remote Controller Operation)
Switch to "GPS" Short press the Enter key to
position enter the GPS mode
Attention:
1) The first flight default to GPS Mode after each power on.
2) n the mode there are ltitude hold fi ed oint brake function the flight s eed is slo er (≤ m/s).
3) If the GPS signal is poor or no signal, can only be Altitude hold, but not fixed point.
4) Switch to manual mode can not be fixed point.
13
Quick Start Guide
Please click the icon in the APP
main interface, then the aircraft
will take off automatically.
Please click the icon in the APP
main interface, then the aircraft
will land automatically.
Throttle stick
return neutral
3.5m
Ground
Ground
Ground