Description Of The Synoptic - ABB REACT 2 Quick Installation Manual

16. Description of the synoptic

03
The synoptic functions on the inverter are described below.
Synoptic icon Description
Indicates the status of the inverter's grid connection
Indicates the status of the WI-FI or ETHERNET communication lines.
Communication status with external meter
Communication status with batteries
Indicates that the inverter has detected an anomaly. The type of problem is
highlighted in the Web User Interface .
The "GFI" (ground fault) LED indicates that the inverter has detected a
ground fault in the DC side photovoltaic generator.
The icons of the synoptic 03
All possible icon activation combinations are shown in the following table. In particular, each icon could behave in one of the following ways:
= icon on
= icon flashing (slow)
= icon flashing (fast)
= icon off
= Any one of the conditions described above
Icon status
Operating state
Wireless not configured or/and Ethernet cable not connected.
Scanning for available wireless networks.
Trying to connect to a network (wifi or ethernet)
Inverter is connected to the network via wifi or ethernet
Icon status
Operating state
"No meter" has been configured during commissioning
Meter is communicating
Meter configured and is not communicating
Icon status
Operating state
No battery has been commissioned
Charging
Discharging
Idle - sleep
Fault
End of battery life reached
on the front panel can behave in different ways depending on the inverter's operating state.
- 19 -
EN
(Continue to next page)