Heat Level Cooking Mode; Temperature Cooking Mode; Changing Temperature Units - Kenyon IntelliKEN Touch B70425 Owner's Manual

Operation

Heat Level Cooking Mode

With the main power on and the element
powered on, swipe your finger along the
temperature control arc and release at the
desired setting. The settings range from
LOW-MED-HIGH in 16 increments, as
indicated by the LED light array that
illuminates along the control sweep. Also, the
arc + and – signs can be toggled to select the
desired heat level. The LED light array will
indicate the selected setting.
The default heat level upon starting any
element is 0. If the element is set or remains at
0 for 15 seconds of inactivity, the element will
de-power.
16 LED LIGHT ARRAY

Temperature Cooking Mode

Select the temperature cooking mode by
touching the thermometer/gradient graphic
within the chosen element control frame.
ELEMENT CONTROL FRAME
+ BUTTON
- BUTTON
LED LIGHT ARRAY
HEATING LEVEL CONTROL SWEEP
Select the desired cooking temperature,
ranging from 150° to 550°F (65° to 287°C),
in 10°F (12°C) increments. The selection can
be made by pressing + or – buttons for each
increment change, or swiping the arc. The
selected cooking temperature value will
illuminate and flash in the control frame while
the selection is in progress. The value will
flash until the temperature is reached. After
the temperature has been reached the value
will illuminate steady, and the cooking
temperature will remain set unless it is
changed. The default temperature setting is
always 150°F (65°C) upon startup in
temperature cooking mode.
Changing Temperature
Units
The temperature units can be changed from
Fahrenheit to Celsius by touching the °F/°C
button in the main power control frame. All
active elements will change accordingly. The
chosen default units will remain with every use
unless changed.
SAFETY LOCK FEATURE
10
COOKI
TEMPERATURE UNIT
SELECTOR BUTTON
MAIN POWER
CONTROL FRAME
TEMP