Table of Contents
Advertisement
Level Probe LGC2
Installation
7.5
Cable Marking
Figure 7.4
• To make installation easier, Pepperl+Fuchs marks the extension cable if a customer-
specific length has been ordered.
Ordering information: product structure, feature "Service", option "RI" or "SI".
• Cable marking tolerance (distance to lower end of level probe):
Cable length < 5 m (16 foot): ±17.5 mm (0.69 inch)
Cable length > 5 m (16 foot): ±0.2 %
• Material: PET, stick-on label: acrylic
• Immunity to temperature change: -30 to +100 °C (-22 to +212 °F)
Note!
The marking is used exclusively for installation purposes. The mark must be thoroughly
removed without trace in the case of devices with drinking water approval. The extension cable
must not be damaged in the process.
Not for use of the device in hazardous areas.
7.6
Cable Shortening Kit
Figure 7.5
The cable shortening kit is used to shorten a cable easily and professionally.
Note!
The cable shortening kit is not designed for the device with FM/CSA approval.
Ordering information: product structure, feature "Accessories", option "WP"
30
Advertisement
Table of Contents
