Table of Contents
Advertisement
Control Buttons
Display Symbols
1.
Automatic range
2.
Diode test
3.
Continuity test
4.
Data hold
5.
Relative zero
6.
Maximum-Minimum mode
7.
Temperature units
8.
Non-contact voltage detector
9.
Units of measure
10. Measurement display digits
11. Low battery icon
12. Minus sign
13. AC and DC symbols
14. Wireless Transmission
Short press to enter Manual range and to select range manually
Long press to return to Auto range
Short presses step through Maximum/Minimum readings, and MAX
minus MIN; Long press to exit. Note that Auto Range is not
operational in MAX/MIN mode. Refer to the MAX/MIN section of
this manual for details
Short press for Relative mode ON/OFF
Long press for data transmission ON/OFF
Short press to select one of the functions available for a given rotary
switch position; Long press while powering up to defeat Auto Power
OFF (APO)
Short press for Data Hold ON/OFF
Long press backlight ON/OFF
Short press to step throughFrequency/Duty Cycle and to exit
7
MM750W-en-GB_v1.1 12/18
Advertisement
Table of Contents
Need help?
Do you have a question about the MM750W and is the answer not in the manual?
Questions and answers