Test Mode 4 (Cis Test) - Panasonic UF-E1 Service Manual

5.5.

Test Mode 4 (CIS TEST)

This test mode is used to check the binary signal output
Step Operation or Unit Condition
1 Standby.
2 Press "FUNCTION".
3 Press "#", " ", "#", "#".
4 Press "4" and "START" to light up LED away.
5 Set the document and then press "START".
6 Press "STOP" to return to test mode standby.
12-MAY 15:00
DEFERRED XMT?
TEST MODE (< >)
CIS TEST
CIS TEST
TEST MODE (< >)
111
LCD Display
UF-E1