Test Mode 0 (Gpm Self Test / Printer Test) - Panasonic UF-E1 Service Manual

UF-E1
5.2.

Test Mode 0 (GPM Self Test / Printer Test)

A test Patterns printed out to check the printer mechanism by the following procedure.
5.2.1. Nozzle Check
Step
1 Standby.
2 Press "FUNCTION".
3 Press "#", " ", "#", "#".
4 Press "0" and "SET".
7 Press "STOP" to return to test mode standby.
8 Press "STOP" to return to standby.
Note:
Refer to the sample copy of the test pattern in below. This TEST MODE must be performed when SC
PCB is replaced or F-ROM data is initialized.
Sample Test Pattern Print
Operation or Unit Condition
12-MAY 15:00
DEFERRED XMT?
TEST MODE
PRINTING
TEST MODE
12-MAY 15:00
102
LCD Display