Getting Started - CDI Traxall X200 User Manual

Confi gurator
Confi gurator is a Windows applica on that will let you customize
frequency, pulse rate, and output power of your transmi ers via FieldLink
wireless communica on.
Requirements:
• PC or laptop computer with Windows® 7 or 8 (32-bit or 64-bit]
• Confi gurator so ware*
• FieldLink USB device**
• Adobe® Reader® is required to access PDF documents
* Available download from CDI website
** Supplied by CDI

GETTING STARTED

Your transmi er requires li le in the way of prepara on. Simply install
fresh ba eries and then run Confi gurator to set transmission signal or
power performance, and your transmi er is ready for a pigging run.
When installing ba eries, replace all ba eries at the same me.
When replacing ba eries, use ba eries from the same
package or manufacturing batch whenever possible.
Do not mix alkaline and lithium ba eries in the same device.
Always observe correct polarity when installing ba eries.
(Polarity is provided on each transmi er case.)
TRAXALL X200 Series Mul frequency Transmi er User Guide
WARNING
Page 6 of 32