Prepare Transmitter: Configuration - CDI Traxall X200 User Manual

PREPARE TRANSMITTER: CONFIGURATION

You will need to have your transmi er powered and antenna cap removed
to run Confi gurator.
Once transmi er is confi gured, the confi gura on se ngs are stored in the
transmi er fl ash memory and you may power down by removing ba eries
un l you are ready to place the transmi er into service.
Remove Antenna Cap
Unscrew and carefully remove the antenna cap.
NOTE: Transmi er antenna end caps marked as shown have
LEFT-HAND threads. Turn CLOCKWISE to remove.
TRAXALL X200 Series Mul frequency Transmi er User Guide
Page 13 of 32
WARNING:
a empt to unfold
or otherwise handle the
fl exible antenna.
Do not