CDI Traxall X200 User Manual page 25

PLACING TRANSMITTER INTO SERVICE (cont.)
Checklist
Before placing a transmi er into service, always ensure that:
• Ba eries are fresh and of proper size and type (see pg. 11).
• Ba ery polarity is properly observed.
• Serviceable O-rings are installed. Bri le and/or deformed O-rings
may not properly seal, thus compromising case integrity.
• Transmi er case, caps, and cap threads are clean and free of dents,
ruptures, or other damage which could compromise the transmi er
components.
TRAXALL X200 Series Mul frequency Transmi er User Guide
Page 25 of 32